Odoo-migration

2024-09-11T14:46:40Z

Admin :

= mise en page =

Remettre le logo dans la configuration de l'entreprise.

Paramètre => paramètre généraux => scoiété => mettre à jour les informations => LOGO

=comptabilité =
== limites de crédit ==
Dans les param globaux de la compta il faut ajouter l'option "limite de crédit"

Dans les comptes client on peut mettre une limite spécifique.

Sans doute ajouter avec un montant important par défaut important et aller mettre une limite pour les clients sensibles.

Laser

2024-09-11T07:37:32Z

Admin :

= Start up sequence =

• make sure to have air => compressor need the air dryer to be aroung 0°C temperature before starting
• power UP machine
• start water cooling/heating system.
• Wait until water is around 20°C before starting the laser generator
• and robot controler =>
◦ power
◦ start button
◦ set number of sheets to cut
◦ reset to 0 number of cuted sheets
◦ ask to move to ZERO positions
◦ put “Auto mode ON”

Loading and unloading sytem
First let’s define names of moving parts
• Table A is the upper table of the laser. -- TA --
• Table B is the lower table of the laser – TB --
• Table Loading is the lower table on the side of the machine – TL --
• Table Unload is the upper table -- TU --
• TU and TL can be in 2 positions, Working (near TA & TB) / Sleep (computer’s side)
• The Arm is the loading and unloading moving part
• “Robot” is the controler for TU & TL

We will considere Robot is not able to know eather it is TA or TB under it. From my understanding it only receive a trigger to say a table is in place. Has tables are not on same hight it very important to start the loading and unloading sequence with the same table !!

So we must allways start a sequence by loading TA, TB and then cut on TA.

=> See Manual Loading Sheet process

=Loading and Unloading process=
On normal drive, TA & TB loaded
1) Laser cuts TA (TA in / TB out)
2) End of cut triggers TA/TB exchange (TA out / TB in)
3) once table exchange done, robot receive a trigger
4) TL/TU (TU moves to Working)
5) ARM takes the cut sheet and drop it to TU
6) TU / TL exchange (TL Working)
7) Laser cut TB
8) ARM take a new sheet and drop it on TA
9) TB/TA exchange (TA in / TB out)
10) TL/TU exchange (TU Working)
11) ARM Unload TB
12) Laser cut TA
13) TU/TL exchange (TL Working)
14) ARM load a sheet on TB
15) TA/TB exchange (TA out / TB in)
16) TL/TU exchange (TU Working)
17) …….

=Manual Loading Sheet process=
==Buttons on control pannel==
[[Fichier:Boutons.png]]
== description ==
• 1st buton => TA (Upper table) loading,
• 2d => TB (Lower table) loading
• 3d => TA (upper table) unloading,
• 4th =>lower table unloading

=How to change some position=
The main idea is to use the manual mode to move arm to the wanted position.
Then going to the parameters.

Once machine at the wanted position just press “save” for long enough time so param is set.

TA is 1 and TB is 2. Sometime A is first and sometime it’s B … carrefull essentially on height for loading and unloading.
Adjust TA and TB to make sure comb teeth are inbetween the plate support.

Click « exchange table » and load in a specific order and you’ll certainly find a solution or you can manage with some pictures …. and cry

Other things
Password and needed access
• Cypcut : 61259023
• Air Compressor :
◦ User => 0539
◦ Config => ???
• Camera : admin/hk123465

Need to set up a Windows system password !

License issue MAXPRO
Firstn link eternet cable to computer.
Make sure they can communicate correctly
User: MAX01010
Password: MAX00043
Decryption password :205911

Here is not agent, you choose MFG
Next time, if it shows expired, you input 179158
and 622201

Spare parts
Laser
• Electrodes (reference !!)
• Oil (all machines !)
• needed software version (Why does CypCut is NOT up2date ?)
• Reference of the soon broken table end position contact
• List
• of
• needed parts
Loading and Unloading system
• Oil
• suction pad (spare)

=Preparing a Batch work=
==Prepare shits from Camduct :==
1. Open file from the DXF folder.
2. Mark each parts using drawing text utility like : XXXXX – YY (Working order 5 digits – part number)
3. Apply pink layer to this draw (just clicking on the pink square while draw is selected)
4. select all
5. turn the parts to change from landscape to portrait. CLOCK (second line on sub-menu)
6. Had microjoints adapting interval regarding parts size. (it can be different on the same sheet , microjoints are set on selected parts)
7. Save file in a dated folder into “batch” folder
==Prepare batch :==
Into CNC click on the multi-file button, create a new batch and add newly created file.

==Launch the bacth :==
Be certain robot console is launched AFTER having start all laser machine (also CypCut Software). To be sure, it’s possible to stop and restart completely robot.

1. Unselect “change palllets after production complete”
2. Make sure “find edge” is activated
3. open the multi-files interface and keep open.
4. Select the first file : “double click” on it
5. Empty both laser tables.
6. Set the number of sheets that you plan to cut on the robot console
7. Reset to 0 the number of sheets proceeded. (bottom right “reset to 0” 4sec.)
8. Put the robot in “AUTO” mod pushing middle of the 3 green buttuns.
9. On CypCut, make sure “change palllets after production complete” is unselected.
10. Make sure exchanger activated.
11. Open “Table exchanger” interface and keep it opened (can be useful for restart on problems during batch)
12. Click on “Loading Start”, wait for sheet loading process to start and unclick
13. At the end of loading process, “Table exchanger” “Pallet Enable” becomes enabled.
14. Activate “ change palllets after production complete”
15. Click on the grey table on “Table exchanger” interface in order to put INSIDE the loaded table.
16. Lake sure shutter is activated and laser generation is ON (do not forget to put AIR ! )
17. Start cut process buy launching the cut. Clicking the “Green arrow”
18. Loading of the second table will start after find edge process is done and cut is starting.

Overthebox

2023-03-27T05:38:33Z

Admin : Page créée avec « = Gestion de la QOS = la fibre => Download bandwidth in kbit/s => 900000 Upload bandwidth in kbit/s => 400000 L'adsl => Download bandwidth in kbit/s => 6000 Upload ba... »

= Gestion de la QOS =

la fibre =>
Download bandwidth in kbit/s => 900000
Upload bandwidth in kbit/s => 400000

L'adsl =>
Download bandwidth in kbit/s => 6000
Upload bandwidth in kbit/s => 800

HP TouchScreen 600

2023-03-17T08:56:29Z

Admin :

!!! installer une DEBIAN 10 !!!

apt-add-repository contrib
apt-add-repository non-free
apt update
apt install nvidia-detect
apt install nvidia-legacy-340xx-driver

https://itsubuntu.com/install-nvidia-drivers-on-debian-11/

sudo apt-add-repository contrib
sudo apt-add-repository non-free
sudo apt update
sudo apt install nvidia-driver

Add "contrib" and "non-free" components to /etc/apt/sources.list, for example:
# Debian Sid
deb http://deb.debian.org/debian/ sid main contrib non-free non-free-firmware

Update the list of available packages, then we can install the nvidia-legacy-340xx-driver package, plus the necessary firmware:
apt update
apt install nvidia-legacy-340xx-driver firmware-misc-nonfree

La partie TouchScreen =>
https://github.com/glorang/nwfermi

Le wifi =>
apt install firmware-misc-nonfree

Activer autologin => passer par GDM le fichier ... c'est un gros fail !
vi /etc/gdm3/daemon.conf

sudo apt install python3-pip python3-pyqt5 vim htop iftop net-tools git
pip install kanboard

Tool-box

2023-03-14T08:15:24Z

Admin :

= TOOL-BOX =
Programme en python qui permet d'interagir avec kanboard.

pip install kanboard

== Ouverture des documents dans firefox ==
pour une bonne gestion des écrans tactiles il faut ajouter au .desktop de firefox une variable d'environnement. (attention dossier snap pour les dernieres versions)
MOZ_USE_XINPUT2=1

Admin -- TALEVAS - Nouvelles pages [fr]

Odoo-migration

Laser

Overthebox

HP TouchScreen 600

Tool-box