Laser - Historique des versions

Admin le 11 septembre 2024 à 08:36

2024-09-11T08:36:18Z

← Version précédente		Version du 11 septembre 2024 à 08:36
Ligne 52 :		Ligne 52 :

	=Manual Loading Sheet process=		=Manual Loading Sheet process=
−	Buttons on control pannel	+	==Buttons on control pannel==
−		+	[[Fichier:Boutons.png]]
		+	== description ==
	• 1st buton => TA (Upper table) loading,		• 1st buton => TA (Upper table) loading,
	• 2d => TB (Lower table) loading		• 2d => TB (Lower table) loading

Admin le 11 septembre 2024 à 08:34

2024-09-11T08:34:18Z

← Version précédente		Version du 11 septembre 2024 à 08:34
Ligne 165 :		Ligne 165 :


−		+	=Preparing a Batch work=
−	Preparing a Batch work:	+	==Prepare shits from Camduct :==
−	Prepare shits from Camduct :	+
	1. Open file from the DXF folder.		1. Open file from the DXF folder.
	2. Mark each parts using drawing text utility like : XXXXX – YY (Working order 5 digits – part number)		2. Mark each parts using drawing text utility like : XXXXX – YY (Working order 5 digits – part number)
Ligne 175 :		Ligne 174 :
	6. Had microjoints adapting interval regarding parts size. (it can be different on the same sheet , microjoints are set on selected parts)		6. Had microjoints adapting interval regarding parts size. (it can be different on the same sheet , microjoints are set on selected parts)
	7. Save file in a dated folder into “batch” folder		7. Save file in a dated folder into “batch” folder
−		+	==Prepare batch :==
−	Prepare batch :	+
	Into CNC click on the multi-file button, create a new batch and add newly created file.		Into CNC click on the multi-file button, create a new batch and add newly created file.


−	Launch the bacth :	+	==Launch the bacth :==
	Be certain robot console is launched AFTER having start all laser machine (also CypCut Software). To be sure, it’s possible to stop and restart completely robot.		Be certain robot console is launched AFTER having start all laser machine (also CypCut Software). To be sure, it’s possible to stop and restart completely robot.

Admin le 11 septembre 2024 à 08:12

2024-09-11T08:12:47Z

← Version précédente		Version du 11 septembre 2024 à 08:12
Ligne 73 :		Ligne 73 :


−	~~how~~ to change some ~~positions~~	+	=How to change some position=
	The main idea is to use the manual mode to move arm to the wanted position.		The main idea is to use the manual mode to move arm to the wanted position.
	Then going to the parameters.		Then going to the parameters.

Admin le 11 septembre 2024 à 08:12

2024-09-11T08:12:11Z

← Version précédente		Version du 11 septembre 2024 à 08:12
Ligne 1 :		Ligne 1 :
−	~~= Table des matières =~~	+	= Start up sequence =
−		+
−		+
−	=== Start up sequence ===	+


Ligne 33 :		Ligne 30 :
	=> See Manual Loading Sheet process		=> See Manual Loading Sheet process

−	Loading and Unloading process	+	=Loading and Unloading process=
	On normal drive, TA & TB loaded		On normal drive, TA & TB loaded
	1) Laser cuts TA (TA in / TB out)		1) Laser cuts TA (TA in / TB out)
Ligne 54 :		Ligne 51 :


−	Manual Loading Sheet process	+	=Manual Loading Sheet process=
	Buttons on control pannel		Buttons on control pannel

Admin le 11 septembre 2024 à 08:11

2024-09-11T08:11:28Z

← Version précédente		Version du 11 septembre 2024 à 08:11
Ligne 1 :		Ligne 1 :
	= Table des matières =		= Table des matières =
−
−	~~=== [[Start up sequence]] ===~~
−	~~=== [[Loading and unloading sytem ===]]~~
−	~~=== [[First let’s define names of moving parts ===]]~~
−	~~=== [[Loading and Unloading process ===]]~~
−	~~=== [[Manual Loading Sheet process ===]]~~
−	~~=== [[Other things ===]]~~
−	~~=== [[Password and needed access ===]]~~
−	~~=== [[Spare parts ===]]~~
−	~~=== [[Laser ===]]~~
−	~~=== [[Loading and Unloading system ===]]~~
−
−
−
−

Admin le 11 septembre 2024 à 08:10

2024-09-11T08:10:06Z

← Version précédente		Version du 11 septembre 2024 à 08:10
Ligne 1 :		Ligne 1 :
	= Table des matières =		= Table des matières =

−	[[=== Start up sequence ===]]	+	=== [[Start up sequence]] ===
−	[[=== Loading and unloading sytem ===]]	+	=== [[Loading and unloading sytem ===]]
−	[[=== First let’s define names of moving parts ===]]	+	=== [[First let’s define names of moving parts ===]]
−	[[=== Loading and Unloading process ===]]	+	=== [[Loading and Unloading process ===]]
−	[[=== Manual Loading Sheet process ===]]	+	=== [[Manual Loading Sheet process ===]]
−	[[=== Other things ===]]	+	=== [[Other things ===]]
−	[[=== Password and needed access ===]]	+	=== [[Password and needed access ===]]
−	[[=== Spare parts ===]]	+	=== [[Spare parts ===]]
−	[[=== Laser ===]]	+	=== [[Laser ===]]
−	[[=== Loading and Unloading system ===]]	+	=== [[Loading and Unloading system ===]]

Admin le 11 septembre 2024 à 08:09

2024-09-11T08:09:26Z

← Version précédente		Version du 11 septembre 2024 à 08:09
Ligne 1 :		Ligne 1 :
	= Table des matières =		= Table des matières =

−	=== Start up sequence ===	+	[[=== Start up sequence ===]]
−	=== Loading and unloading sytem ===	+	[[=== Loading and unloading sytem ===]]
−	=== First let’s define names of moving parts ===	+	[[=== First let’s define names of moving parts ===]]
−	=== Loading and Unloading process ===	+	[[=== Loading and Unloading process ===]]
−	=== Manual Loading Sheet process ===	+	[[=== Manual Loading Sheet process ===]]
−	=== Other things ===	+	[[=== Other things ===]]
−	=== Password and needed access ===	+	[[=== Password and needed access ===]]
−	=== Spare parts ===	+	[[=== Spare parts ===]]
−	=== Laser ===	+	[[=== Laser ===]]
−	=== Loading and Unloading system ===	+	[[=== Loading and Unloading system ===]]

Admin le 11 septembre 2024 à 08:08

2024-09-11T08:08:11Z

← Version précédente		Version du 11 septembre 2024 à 08:08
Ligne 1 :		Ligne 1 :
−	Table des matières	+	= Table des matières =
−	Start up sequence 1	+
−	Loading and unloading sytem 1	+	=== Start up sequence ===
−	First let’s define names of moving parts 1	+	=== Loading and unloading sytem ===
−	Loading and Unloading process 2	+	=== First let’s define names of moving parts ===
−	Manual Loading Sheet process 2	+	=== Loading and Unloading process ===
−	Other things 2	+	=== Manual Loading Sheet process ===
−	Password and needed access 2	+	=== Other things ===
−	Spare parts 3	+	=== Password and needed access ===
−	Laser 3	+	=== Spare parts ===
−	Loading and Unloading system 3	+	=== Laser ===
		+	=== Loading and Unloading system ===


Ligne 15 :		Ligne 16 :


−	Start up sequence	+
		+	=== Start up sequence ===
		+

	• make sure to have air => compressor need the air dryer to be aroung 0°C temperature before starting		• make sure to have air => compressor need the air dryer to be aroung 0°C temperature before starting

Admin : Page créée avec « Table des matières Start up sequence 1 Loading and unloading sytem 1 First let’s define names of moving parts 1 Loading and Unloading process 2 Manual Loading Sheet proces... »

2024-09-11T07:37:32Z

Page créée avec « Table des matières Start up sequence 1 Loading and unloading sytem 1 First let’s define names of moving parts 1 Loading and Unloading process 2 Manual Loading Sheet proces... »

Nouvelle page

Table des matières
Start up sequence 1
Loading and unloading sytem 1
First let’s define names of moving parts 1
Loading and Unloading process 2
Manual Loading Sheet process 2
Other things 2
Password and needed access 2
Spare parts 3
Laser 3
Loading and Unloading system 3

Start up sequence

• make sure to have air => compressor need the air dryer to be aroung 0°C temperature before starting
• power UP machine
• start water cooling/heating system.
• Wait until water is around 20°C before starting the laser generator
• and robot controler =>
◦ power
◦ start button
◦ set number of sheets to cut
◦ reset to 0 number of cuted sheets
◦ ask to move to ZERO positions
◦ put “Auto mode ON”

Loading and unloading sytem
First let’s define names of moving parts
• Table A is the upper table of the laser. -- TA --
• Table B is the lower table of the laser – TB --
• Table Loading is the lower table on the side of the machine – TL --
• Table Unload is the upper table -- TU --
• TU and TL can be in 2 positions, Working (near TA & TB) / Sleep (computer’s side)
• The Arm is the loading and unloading moving part
• “Robot” is the controler for TU & TL

We will considere Robot is not able to know eather it is TA or TB under it. From my understanding it only receive a trigger to say a table is in place. Has tables are not on same hight it very important to start the loading and unloading sequence with the same table !!

So we must allways start a sequence by loading TA, TB and then cut on TA.

=> See Manual Loading Sheet process

Loading and Unloading process
On normal drive, TA & TB loaded
1) Laser cuts TA (TA in / TB out)
2) End of cut triggers TA/TB exchange (TA out / TB in)
3) once table exchange done, robot receive a trigger
4) TL/TU (TU moves to Working)
5) ARM takes the cut sheet and drop it to TU
6) TU / TL exchange (TL Working)
7) Laser cut TB
8) ARM take a new sheet and drop it on TA
9) TB/TA exchange (TA in / TB out)
10) TL/TU exchange (TU Working)
11) ARM Unload TB
12) Laser cut TA
13) TU/TL exchange (TL Working)
14) ARM load a sheet on TB
15) TA/TB exchange (TA out / TB in)
16) TL/TU exchange (TU Working)
17) …….

Manual Loading Sheet process
Buttons on control pannel

• 1st buton => TA (Upper table) loading,
• 2d => TB (Lower table) loading
• 3d => TA (upper table) unloading,
• 4th =>lower table unloading

how to change some positions
The main idea is to use the manual mode to move arm to the wanted position.
Then going to the parameters.

Once machine at the wanted position just press “save” for long enough time so param is set.

TA is 1 and TB is 2. Sometime A is first and sometime it’s B … carrefull essentially on height for loading and unloading.
Adjust TA and TB to make sure comb teeth are inbetween the plate support.

Click « exchange table » and load in a specific order and you’ll certainly find a solution or you can manage with some pictures …. and cry

Other things
Password and needed access
• Cypcut : 61259023
• Air Compressor :
◦ User => 0539
◦ Config => ???
• Camera : admin/hk123465

Need to set up a Windows system password !

License issue MAXPRO
Firstn link eternet cable to computer.
Make sure they can communicate correctly
User: MAX01010
Password: MAX00043
Decryption password :205911

Here is not agent, you choose MFG
Next time, if it shows expired, you input 179158
and 622201

Spare parts
Laser
• Electrodes (reference !!)
• Oil (all machines !)
• needed software version (Why does CypCut is NOT up2date ?)
• Reference of the soon broken table end position contact
• List
• of
• needed parts
Loading and Unloading system
• Oil
• suction pad (spare)

Preparing a Batch work:
Prepare shits from Camduct :
1. Open file from the DXF folder.
2. Mark each parts using drawing text utility like : XXXXX – YY (Working order 5 digits – part number)
3. Apply pink layer to this draw (just clicking on the pink square while draw is selected)
4. select all
5. turn the parts to change from landscape to portrait. CLOCK (second line on sub-menu)
6. Had microjoints adapting interval regarding parts size. (it can be different on the same sheet , microjoints are set on selected parts)
7. Save file in a dated folder into “batch” folder

Prepare batch :
Into CNC click on the multi-file button, create a new batch and add newly created file.

Launch the bacth :
Be certain robot console is launched AFTER having start all laser machine (also CypCut Software). To be sure, it’s possible to stop and restart completely robot.

1. Unselect “change palllets after production complete”
2. Make sure “find edge” is activated
3. open the multi-files interface and keep open.
4. Select the first file : “double click” on it
5. Empty both laser tables.
6. Set the number of sheets that you plan to cut on the robot console
7. Reset to 0 the number of sheets proceeded. (bottom right “reset to 0” 4sec.)
8. Put the robot in “AUTO” mod pushing middle of the 3 green buttuns.
9. On CypCut, make sure “change palllets after production complete” is unselected.
10. Make sure exchanger activated.
11. Open “Table exchanger” interface and keep it opened (can be useful for restart on problems during batch)
12. Click on “Loading Start”, wait for sheet loading process to start and unclick
13. At the end of loading process, “Table exchanger” “Pallet Enable” becomes enabled.
14. Activate “ change palllets after production complete”
15. Click on the grey table on “Table exchanger” interface in order to put INSIDE the loaded table.
16. Lake sure shutter is activated and laser generation is ON (do not forget to put AIR ! )
17. Start cut process buy launching the cut. Clicking the “Green arrow”
18. Loading of the second table will start after find edge process is done and cut is starting.